Stiver Engineering was retained to provide a contractor in Austin, Texas with a caisson design for the proposed Canyon Lake intake structure. The structure was designed to be 20 feet in diameter and 135 feet deep, and it was constructed by blasting through 135 feet of limestone. Stiver Engineering provided structural design by designing…
Due to a number of issues, there was a 1.1-mile gap in the Trail at Lady Bird Lake in Austin, Texas. Along this gap, visitors had to divert onto the narrow sidewalk and travel along busy Riverside Drive, crossing six lanes of I-35 access roads to travel east or west and use the south side…
Stiver Engineering was retained by the client in Texas City, Texas to provide structural design through a caisson design and a 36-inch diameter force main design. The structure was built above grade with excavation of the inside soil, and it was allowed to sink to finish grade. The project included twin natural gas standby generators…
Stiver Engineering was retained in Texas by the contractor to provide structural design by designing the caisson structure. We designed the caisson to be built above grade and sunk to finished grade.
This project’s scope required the design of an intake structure for water treatment from Lake Rathbun at a depth of 53 feet below ground level. Stiver Engineering provided the client with structural design through a 20-foot diameter by 64-foot deep caisson design. We designed the reinforced concrete structure to be poured in lifts and sunk…